Motorola WT4090, Integrator Manual, Page: 81 / 206

Wireless Applications 5 - 15
Figure 5-17
Password Dialog Box
1.
Enter a password in the
Password
field.
2.
Press
TAB
to highlight the
Advanced ID
check box.
3.
Press
ALT
>
BKSP
(SPACE) to select the
Advanced ID
check box, if advanced identification is required.
4.
Press
TAB
twice to highlight the
Next
button.
5.
Press
ENTER
. The
Encryption
dialog box displays. See Encryption on page 4-17 .
Advanced Identity
Use the
Advanced ID
dialog box to enter the 802.1X identity to supply to the authenticator. This value can be 63
characters long and is case sensitive. In TTLS and PEAP, it is recommended entering the identity anonymous
(rather than a true identity) plus any desired realm (e.g., anonymous@myrealm). A user ID is required before
proceeding.
Figure 5-18
Advanced Identity Dialog Box
1.
Enter the 802.1x identity information in the
802.1x Identity
field.
2.
Press
TAB
.
3.
Enter the domain name in the
Domain
field.
4.
Press
TAB
twice to highlight the
Next
button.
5.
Press
ENTER
. The
Encryption
dialog box displays.
Encryption
Use the
Encryption
dialog box to select an encryption type. The drop-down list includes encryption types available
for the selected authentication type. See Table 5-10 for these encryption types.
1.
Use the navigation keys to select an encryption type.
If
40-Bit WEP
or
128-Bit WEP
are selected, the Key Index and Use Passkey fields appear.
NOTE
When authenticating with a Microsoft IAS server, do not use advanced identity.