Alternatively, scan the following QR Code:
.
6.2
Pairing the RSM to the Radio
Pairing the RSM through Bluetooth
Procedure:
1
While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2
From the compatible device, search and select "WM500" from the Bluetooth list.
3
Once the devices are paired successfully, a "Pairing Successful" tone is played.
4
A voice prompt from the RSM indicates that the device is "Connected".
5
Choose RSM from the Bluetooth list and pair again for second time (This is for iPhones only).
Pairing the RSM through NFC
Procedure:
1
While RSM is power off, press and hold the Power button until the "Power On" voice prompt
follows by "Searching for Host" voice prompt is played and blue LED blinks.
2
Align the NFC locations on both the RSM and the compatible devices.
3
Check the compatible device for indication of successful pairing.
Unpairing the RSM
Procedure:
1
While RSM is power off, press and hold the Power button and PTT buttons.
2
The blue LED blinks and a voice prompt from the RSM indicates that the paired device is
"Cleared".
6.3
Replacing the Battery
Prerequisites:
WARNING:
• Before you start the dismantling procedure, power off the RSM.
• Wear an appropriate electrostatic discharge (ESD) protection device.
Procedure:
1
Open the USB dust cover.
MN006126A01-AA
Chapter 6: Maintenance
16
