Motorola WiNG 5, System Reference Manual

Page: 241 / 802

Device Configuration 5 - 181
5.7 RF Domain Overrides
Use RF Domain Overrides to define settings overriding a target device’s original RF Domain configuration.
An RF Domain allows an administrator to assign configuration data to multiple access points (of the same model) deployed
in a common coverage area (floor, building or site). In such instances, there’s many configuration attributes these devices
share as their general client support roles are quite similar. However, device configurations may need periodic refinement
from their original RF Domain administered design. Unlike a RFS series controller, an access point supports a single RF
domain. An access point RF Domain cannot be used on a different model access point. For example, an AP-6532 RF Domain
override can only be applied to another AP-6532 model access point.
To define a device’s RF Domain override configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
3. Select Device Overrides .
4. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
5. Select RF Domain Overrides .