manualshive.com logo in svg

Motorola WiNG 5, System Reference Manual

Share
Download
Motorola WiNG 5 System Reference Manual Download Page 203

Device Configuration 5 - 143

5.3.10.2 Profile Management Configuration and Deployment Considerations

Profile Management Configuration

Before defining a access point profile’s management configuration, refer to the following deployment guidelines to ensure 
the profile configuration is optimally effective: 

• Define profile management access configurations providing both encryption and authentication. Management 

services like HTTPS, SSH and SNMPv3 should be used when possible, as they provide data privacy and authentication.

• Motorola Solutions recommends SNMPv3 be used for management profile configurations, as it provides both 

encryption, and authentication.

5.3.11 Advanced Profile Configuration

An access point profile’s advanced configuration is comprised of defining connected client load balance settings, a MINT 
protocol configuration and miscellaneous settings (NAS ID, access point LEDs and RF Domain Manager). 

To set an access point profile’s advanced configuration:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

.

3. Select 

System Profile

 from the options on left-hand side of the UI.

4. Expand the

 Advanced

 menu item.

The following items are available as advanced access point profile configuration options:

•

Advanced Profile Client Load Balancing

•

Configuring MINT

•

Advanced Profile Miscellaneous Configuration

Summary of Contents for WiNG 5



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands