Motorola WiNG 5.7.1, System Reference Manual

Page: 846 / 1090

13 - 30 WiNG 5.7.1 Access Point System Reference Guide
13.2.8.3 Traffic Statistics
Radios
The Traffic Statistics screen displays transmit and receive data as well as data rate and packet drop and error information
for RF Domain member radios. Individual RF Domain member radios can be selected and to information specific to that radio
as troubleshoot requirements dictate.
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Expand Radios from the RF Domain menu and select Traffic Statistics.
Signal Displays the power of listed RF Domain member radio signals in dBm.
Noise Lists the level of noise (in - X dbm format) reported by each listed RF Domain member access
point.
SNR Displays the signal to noise ratio (SNR) of each listed RF Domain member radio.
Tx Physical Layer
Rate Displays the data transmit rate for each RF Domain member radio’s physical layer. The rate is
displayed in Mbps.
Rx Physical Layer
Rate Displays the data receive rate for each RF Domain member radio’s physical layer. The rate is
displayed in Mbps.
Avg Retry Number Displays the average number of retries for each RF Domain member radio.
Error Rate Displays the average number of retries per packet. A high number indicates possible network
or hardware problems.
RF Quality Index Displays an integer (and performance icon) that indicates the overall RF performance for each
listed radio. The RF quality indices are:
• 0 – 50 (Poor)
• 50 – 75 (Medium)
• 75 – 100 (Good)
Refresh Select the Refresh button to update the statistics counters to their latest values.