Motorola WA9901 Integrator Manual Download Page 63

Page: 63 / 70

Technical Specifications

A - 3

User Environment

Operating Temperature

-20°C to +50°C (-4°F to +122°F)

Storage Temperature

-40°C to +60°C (-40°F to +140°F)

Humidity

5% to 95% non condensing

Drop Specification

1.5 m (5 ft.) 26 drops to polished concrete (powered with options and accessories)
Multiple 1.8 m (6 ft.) drops to polished concrete

Note

This drop rating is not supported by circular antenna configurations –

Models WA9903 & WA9904.

Environmental Sealing

IP 65, IEC 60529

ESD

+/-15 kV air discharge
+/-8 kV contact

RFID Module Options

UHF Module

Frequency: 885.7-867.5 MHz or 902-928 MHz
Protocols supported: EPC Class 1 Gen 2; ISO 18000-6C

Antenna

UHF Linear polarized antenna (End-cap)
or
UHF Circular polarized antenna (Pod)

Wireless Data Communications

WWAN Radio

Optional UMTS/HSPA + WAN radio (data only in the Americas) with GPS receiver
(supports AGPS, GLONASS and SBAS)

Note:

In the Americas, no co-transmission is possible with RFID. RFID and WWAN

work in toggle mode. In Europe, the voice feature is only offered with the linear
antenna RFID kit.

WLAN Radio

802.11a/b/g/n; optional diversity antenna module available

WLAN Data Rates

802.11a - up to 54 Mbps
802.11b/g - up to 54 Mbps
802.11n @ 2.4 GHz - up to 72.2 Mbps
802.11n @ 5 GHz - up to 72 Mbps

WLAN Security

WEP (40 or 104 bit)
WPA /WPA 2 Personal
WPA / WPA 2 Enterprise - EAP -TTL S (PAP, MSCHAP, MSCHAPv2), EAP-TLS,
PEAPv0-MSCHAPv2, PEAPv1-EAP-GTC, EAP-FAST, TKIP, AES

Bluetooth

Integrated

Bluetooth

V2.0+EDR

Bluetooth

coexistence

GPS

Optional GPS/Wi-Fi diversity antenna module (supports AGPS and SBAS)

Voice and Audio

Table A-1

Technical Specifications (Continued)

Item

Workabout Pro4 RFID

Summary of Contents for WA9901







































































Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands

Motorola WA9901, Integrator Manual

Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands