Motorola WA9901 Integrator Manual Download Page 40

Page: 40 / 70

4 - 8

Workabout Pro4 RFID Mobile Computer Integrator Guide

Singulation

Select

Menu > Config > Singulation

to view/configure the singulation control settings for each antenna.

Figure 4-8

Singulation Control Settings Window

This window includes the following fields:

•

Antenna ID

- Selecting an antenna ID updates the configuration values in the other fields.

•

Session

- The session number for the inventory operation.

•

Tag Population

- The approximate tag population in the RF field of the antenna.

•

Tag Transit Time

- The time in milliseconds that the tag typically remains in the RF field of the antenna.

•

State Aware

- Indicates if the antenna performs state aware or state unaware singulation.

•

Inventory State

- Select a tag of state A or B. Valid only for State Aware singulation

•

SL Flag

- Valid only for State Aware singulation

•

Apply

- Select to apply the configuration changes.

Summary of Contents for WA9901







































































Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands

Motorola WA9901, Integrator Manual

Search results

Summary of Contents for WA9901

Reviews:

Related manuals for WA9901

Brands by name

Popular brands