manualshive.com logo in svg

Motorola WA9901, Integrator Manual

The Motorola WA9901 Integrator Manual is a comprehensive guide for utilizing the full capabilities of your device. This user-friendly manual is available for free download from our website, providing step-by-step instructions and troubleshooting tips to ensure you make the most of your Motorola WA9901.

Share
Download
background image

MobileRFID Functionality

3 - 7

Configure RFID 

RFID is in Server Mode by default. To configure RFID to operate in Client Mode:

1.

Invoke the MobileRFID menu, then tap 

Configure RFID

.

Figure 3-10    

RFID Configuration Window

2.

Select the 

Client Mode

 check box. 

3.

In the 

LLRP Port

 field, enter the port number on which the server waits for the RFID client to communicate. The 

default is 5084.

4.

In the 

Server IP

 field, enter the server IP for the remote host to which RFID communicates as a client.

5.

Tap 

Apply

.

6.

Tap 

OK

 to close the window.

Summary of Contents for WA9901







































































Reviews:

No comments

Related manuals for WA9901

Partner MF-2351 Manual preview
MF-2351
Brand: Partner Pages: 13
Hughes 3501431-0002 Installation Manual preview
3501431-0002
Brand: Hughes Pages: 17
MapAsia MapKing!G10 User Manual preview
MapKing!G10
Brand: MapAsia Pages: 34
Zebex Z-2060 series User Manual preview
Z-2060 series
Brand: Zebex Pages: 55
Palm Zire 21 Handbook preview
Zire 21
Brand: Palm Pages: 196
Honeywell ScanPal EDA50 User Manual preview
ScanPal EDA50
Brand: Honeywell Pages: 83
Honeywell EDA50-011 User Manual preview
EDA50-011
Brand: Honeywell Pages: 82
Honeywell EDA50K-0 User Manual preview
EDA50K-0
Brand: Honeywell Pages: 89
Honeywell MX3PLUS Reference Manual preview
MX3PLUS
Brand: Honeywell Pages: 306
Honeywell Optimus 5100 User Manual preview
Optimus 5100
Brand: Honeywell Pages: 64
Honeywell ScanPal EDA51 User Manual preview
ScanPal EDA51
Brand: Honeywell Pages: 100
Honeywell MX8 Reference Manual preview
MX8
Brand: Honeywell Pages: 318
ViewSonic V 37 User Manual preview
V 37
Brand: ViewSonic Pages: 92
JRC JUE-33 Brochure preview
JUE-33
Brand: JRC Pages: 2
palmOne Tungsten E2 Read This First Manual preview
Tungsten E2
Brand: palmOne Pages: 12
Shinano Kenshi PTX1 Pro User Manual preview
PTX1 Pro
Brand: Shinano Kenshi Pages: 96
Shinano Kenshi PTP 1 User Manual preview
PTP 1
Brand: Shinano Kenshi Pages: 162
Hytera HR960 Quick Reference Manual preview
HR960
Brand: Hytera Pages: 9

Brands by name

Popular brands

Load more brands