Motorola VX-P949 User Manual Download

Page: 70 / 112

6.10.4.13

Deleting All Text Messages

Procedure:

Perform one of the following actions:

• Press the preprogrammed

TMS Feature

button to access the Messaging feature screen.

•

or to

TMS

and press the

Menu Select

button directly below

TMS

to access the

TMS

feature screen.

Inbox

Sent

then press the

Menu Select

button below

Clr

to select all

messages in the selected folder.

The display shows

Del all?

Perform one of the following actions:

• Press the

Menu Select

button directly below

Yes

to delete all the messages in the selected

folder.

• Press the

Menu Select

button directly below

to return to the main

TMS

feature screen.

6.11

Secure Operations

Secure radio operation provides the highest commercially available level of voice security on
conventional channels.

6.11.1

Selecting Secure Transmissions

Procedure:

Press the preprogrammed

Secure/Clear

button to toggle to secure mode.

• If the selected channel is preprogrammed for clear-only operation, when you press the

PTT

button, you hear an invalid mode tone and the display shows

Clear TX only

• The radio does not transmit until you toggle the

Secure/Clear

button to the clear mode.

6.11.2

Selecting Clear Transmissions

Procedure:

Press the preprogrammed

Secure/Clear

button to toggle to clear mode.

• If the selected channel is preprogrammed for secure-only operation, when you press the

PTT

button, you hear an invalid mode tone and the display shows

Secure TX only

• The radio does not transmit until you toggle the

Secure/ Clear

button to the secure mode.

• You can request to configure the radio to ignore the clear voice or insecured transmission

when the radio is in secured transmission. Check with your agent for details.

MN003602A01-AF
Advanced Features

Summary of Contents for VX-P949
















































































































Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands

Motorola VX-P949, User Manual

Search results

Summary of Contents for VX-P949

Reviews:

Related manuals for VX-P949

Brands by name

Popular brands