Overview Installation Troubleshooting
Contact
FAQ
Specifications Glossary License
Configuration:
Basic Gateway TCP/IP Wireless Print Server USB
VT2500/VT2400 Voice Gateway User Guide
v
The service provider, not Motorola, is responsible for the provision of VoIP telephony services through this
equipment. Motorola shall not be liable for, and expressly disclaims, any direct or indirect liabilities, damages,
losses, claims, demands, actions, causes of action, risks or harms arising from or related to the services provided
through this equipment.
IMPORTANT: You CANNOT make any calls using this VoIP device if your broadband connection is not functioning
properly or if you lose electrical power.
CAUTION: Exposure to Radio Frequency Radiation.
To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and
any person’s body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches).
Canada - Industry Canada (IC)
The wireless radio of this device complies with RSS 210 and RSS 102 of Industry Canada.
This Class B digital device complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause undesired operation.
This device has been designed to operate with two antennae: one is a detachable dipole antenna (reverse SMA
type, Tx and RX) that has a maximum gain of 3 dBi; the second is a chip antenna (RX type only) that has a
maximum gain of 2 dBi. Any antenna having a higher gain is strictly prohibited per regulations of Industry Canada.
The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.
Only use the antenna(s) provided with this product or an antenna approved by Motorola.
Regulatory, Safety, Software License, and Warranty Information Card
This product is provided with a separate
Regulatory, Safety, Software License, and Warranty Information
card. If
one is not provided with this product, please ask your service provider or point-of-purchase representative, as the
case may be.
•
THIS PRODUCT IS IN COMPLIANCE WITH ONE OR MORE OF THE STANDARDS LISTED ON THE
REGULATORY, SAFETY, SOFTWARE LICENSE, AND WARRANTY INFORMATION
CARD. NOT ALL
STANDARDS APPLY TO ALL MODELS.
•
NO WARRANTIES OF ANY KIND ARE PROVIDED BY MOTOROLA WITH RESPECT TO THIS PRODUCT,
EXCEPT AS STATED ON THE
REGULATORY, SAFETY, SOFTWARE LICENSE, AND WARRANTY
