Motorola VLR 150, User Manual

Page: 35 / 76

Cu
stomer Programmi
ng Mod
e
31
Entering Advanced Configuration Mode
Advanced Configuration Mode allows you to configure special settings in your radio
without the need of a computer.
Press and hold
Push to Talk
and
T
for 3 seconds while turning the radio on. The
radio beeps and displays
k
, the channel number blinks, and the frequency
(indicated by
l
) and code (indicated by
y
) display alternately.
Note:
If you press and release the
Push to Talk
button when programming CSL1410
models, you will return to the front of the Advanced Configuration Mode.
Selecting a Channel
1. In advanced configuration mode, press
S
until the channel number
blinks and the frequency and code display alternately (this is the
first setting after you enter advanced configuration mode).
2. Press
[
or
]
to select the channel.
3. Press and hold
Push to Talk
to exit, or press
S
to continue
programming.
Configuring the Operating Frequency from a Pre-programmed Frequency List
1. In advanced configuration mode, press
S
until
l
displays and
the frequency number blinks.
2. Press
[
or
]
to select the frequency.
3. Press and hold
Push to Talk
to exit, or press
S
to continue
programming.
6881097c75_.book Page 31 Friday, April 8, 2016 2:50 PM