background image

6

 

        November 17, 2004   

6809490A75-O

Introduction

 V635

Computer Program Copyrights

The Motorola products described in this manual may include Motorola computer 
programs stored in semiconductor memories or other media that are copyrighted 
with all rights reserved worldwide to Motorola. Laws in the United States and other 
countries preserve for Motorola, Inc. certain exclusive rights to the copyrighted 
computer programs, including the exclusive right to copy, reproduce, modify, 
decompile, disassemble, and reverse-engineer the Motorola computer programs in 
any manner or form without Motorola's prior written consent. Furthermore, the 
purchase of Motorola products shall not be deemed to grant either directly or by 
implication, estoppel, or otherwise, any license or rights under the copyrights, 
patents, or patent applications of Motorola, except for a nonexclusive license to use 
the Motorola product and the Motorola computer programs with the Motorola 
product.

About This Service Manual

Use of this manual assures proper installation, operation, and maintenance of 
Motorola products and equipment. It contains all service information required for 
the equipment described and is current as of the printing date. Refer questions 
about this manual to the nearest Customer Service Manager.

Audience

This manual aids service personnel in testing and repairing V635 telephones. 
Service personnel should be familiar with electronic assembly, testing, and 
troubleshooting methods, and with the operation and use of associated test 
equipment.

Scope

This manual provides basic information relating to V635 telephones, and also 
provides procedures and processes for repairing the phones at Level 1 and 2 service 
centers including:
• Unit  swap  out
• Repairing of mechanical faults
• Basic modular troubleshooting
• Testing and verification of unit functionality
• Initiate warranty claims and send faulty modules to Level 3 or 4 repair 

 

centers

Summary of Contents for V635

























































Reviews: