6809507A01-O
October 02, 2006
33
Level 2 Service Manual
Disassembly
Removing and Replacing the Display PC Board
1.
Remove the battery cover, battery, antenna, rear housing, transceiver board,
keypad, flip assembly, flip lens, flip cover, flip assembly shield, and external
display as described in the procedures.
2.
Use the disassembly tool to carefully lift the speaker screen away from the
housing starting at the top edge of the flip, peeling the screen under the
earpiece speaker.
3.
Use the disassembly tool to disconnect the display flex from its connector and
lift out the display PC board from the flip housing (see Figure 19).
4.
To replace, align the display PC board with the flip housing and press it into
place.
5.
Align the display flex with its connector and press it into place.
6.
Replace the external display, flip assembly shield, flip cover flip lens, flip
assembly, keypad, transceiver board, rear housing, antenna, battery, and
battery cover as described in the procedures.
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
050870o
Figure 19. Removing the Display PC Board.
Disassembly Tool
Display Flex
