6809507A01-O
October 02, 2006
29
Level 2 Service Manual
Disassembly
Removing and Replacing the Flip Display Lens
1.
Remove the battery cover, battery, antenna, rear housing, transceiver board,
keypad, and flip assembly as described in the procedures.
2.
Insert the flat end of the disassembly tool between the main display lens and
the flip and separate the lens from the flip (see Figure 14).
3.
To replace, remove the adhesive backing from the display lens and align the
display lens to the flip assembly. Carefully press the display lens into position
on the flip assembly.
4.
Replace the flip assembly, keypad, transceiver board, rear housing, antenna,
battery, and battery cover as described in the procedures.
050865o
Figure 14. Removing the Flip Display Lens
Lens
Disassembly Tool
Flip Assembly
