Motorola TETRA MTM800, Feature User Manual, Page: 21 / 382

13
G
e
tt
in
g
S
ta
rte
d
Data Connected
Displayed when the MTM800 Enhanced is
successfully connected to an external device and
ready for data transfer.
Data Transmit/Receive
Displayed when the MTM800 Enhanced is
transferring data to/receiving data from the external
device (laptop or desktop PC).
No number — standby data session.
Number 1, 2, 3, or 4 — indicates active data session
with 25%, 50%, 75%, or 100% bandwidth.
Direct Mode Operation
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTM800 Enhanced is in Direct
Mode.
DMO Gateway
Indicates that gateway is selected. The icon has three
states:
Solid — while the MTM800 Enhanced is
synchronised with the gateway.
Flashing — while the MTM800 Enhanced is not
synchronised or during attachment.
No icon — during a terminal to terminal and repeater
call.
DMO Repeater
Displayed when the repeater option in DMO is
selected. This icon has three states:
Solid — while the terminal has detected the repeater
(i.e., when the terminal receives a presence signal).
Blinking — while the terminal has not detected the
repeater or during attachment.
No icon — during a terminal to terminal and gateway
call.
Status
Icon
Description
to