Procedure:
1
Perform one of the following actions:
• Press
End
if your radio displays
Emergency Mic On
.
• Press and hold
Exit
.
NOTE:
Press the
End
key if an Emergency Operation triggered by Emergency
number (not by
Emergency
button) to exit the Emergency Operation.
Your radio exits Emergency Operations.
3.6
Repeater Mode
NOTE:
This is a Software Selling Feature. Repeater Mode does not apply to MTM5200 radio.
The Repeater Mode provides repeater connectivity between radios operating in the DMO Mode.
Figure 6: Repeater Mode Operation
DMO
DMO
When the radio is in DMO repeater mode, it extends the DMO range by retransmitting received
information from one radio to another. It retransmits group calls, private calls and data on a given
frequency. In the diagram, the radio in the middle serves as a repeater.
The repeater sends presence signal periodically on a free channel to allow other radios to synchronize
on a given frequency.
Only the radios on the same talkgroup can communicate with each other through the repeater.
The Repeater Mode is activated by selecting
Menu
→
Networks
→
Repeater Mode
.
3.6.1
Setting Monitor Option
Procedure:
1
From the home screen, press
Options
.
2
Press
Monitor
.
3
Select one of the following options:
68015000180-MR
Chapter 3 : Modes
62
