14
Group Talk
Initiating a Group Talk
To select your desired Group Talk location, press the
Group Selector button.
•
A short, high-pitched tone will sound and the LED
Indicator of your selected Group will light
momentarily, then blink every few seconds.
Press and hold the PTT button to initiate a Group
Talk.
•
Two (2) medium-pitched access tones and one (1)
high-pitched permit tone will sound, indicating that
you may begin speaking. The LED Indicator will light
continuously when transmitting.
Speak into the Radio and release the PTT button to
listen.
Group Busy Signal
If a continuous, low-pitched tone is heard while pressing
the PTT button when attempting a Group Talk, it
indicates that someone else is talking on that Group.
User Out of Range
If a continuous low-pitched tone is heard while
attempting a Group Talk, it indicates that you are out of
range or the Control Station is inoperable.
System Busy Signal
If fast, low-pitched busy tones are heard while attempting
a Group Talk, it indicates that all system resources are
busy.
1
2
3