Motorola TALKABOUT T2688, User Manual, Page: 27 / 68

9
Chapter 1: Basic Operation
1
.1 Turn On the Phone Power
Long press key for a few seconds to turn on the phone power and enter
standby mode.
1
.2 Turn Off the Phone Power
Long press key for a few seconds to turn off the phone power.
1
.3 Make a Call
Œ
Long press key for a few seconds to switch your phone on.
•
Enter your PIN and press key.
Ž
After the PIN is accepted, your phone will start searching for the
designated network automatically.
•
After connecting to the network successfully, the LCD display will show
which network you connect to and go into standby mode.
•
In this standby mode, dial the phone number including the area code.
Then, press key to send out your call.
♦ When the network service is not available, no signal level will
be displayed on the screen.
♦ When connected to the network other than your designated
one, the signal strength will still be displayed on the screen.
However, you can only make an emergency call.
♦ During a call, you can use the call functions described on
page 13.
1
.4 End a Call
Press key to end or cancel a call.