Motorola T201I Series, Manual

Page: 30 / 44

T200I EN IN.2 UG .indd 30 15/05/2019 09:13
M
M M
M
M
M M
9. Using additional handsets
You can register up to 4 handsets to your T2I base to extend your phone
system without having to install extension sockets for each new phone.
Each handset can be registered with up to four bases. Then, select your
preferable base.
If you have purchased a T2I multiple pack, all additional handsets come
preregistered to the base.
If you have purchased an additional handset separately, you must register it to
your T2I base before it can be used.
9.1 Registering an additional handset
Note
Handset batteries must be fully charged before you start to register. Hold your
handset close to the base during the registration process. Handsets that were
supplied with your T2I base are already pre-registered.
On the base:
Press and hold
P
(on the underside of the base) for 5 seconds. The base will
remain in registration mode for 90 seconds.
On the handset:
1. Press , scroll d to REGISTER and press .
2. Scroll d to REG BASE and press .
3. Enter the base number (1-4).
4. The display will ask for the PIN to be entered. Enter the 4 digit PIN code
(default = 0000) and press .
5. The handset is automatically assigned an available handset number if the
registration is successful. Use this number when making internal calls.
Note
If registration is not successful the first time, please repeat the process again in
case the base registration period ran out of time. If the base is not found after
a few seconds, the handset returns to standby. Try registering again.
If there are already 4 handsets registered to the base, the registration will fail.
You must de-register another handset before you can register a new one.
9.2 To select a base
You can register the handset with up to 4 bases. Once registered, you can
switch between bases, for example, bases at home and at work.
1. Press , scroll d to
REGISTER
and press . The display shows
SELECT
BASE .
2. Press . The display shows all the base that your handsets registered to
(e.g. BASE 1234 ). The base number currently selected will flash.
3. Enter the base number that you want to use. You will hear a confirmation
beep and the display will return to the previous menu.
30 Using additional handsets