Motorola T201I Series, Manual

Page: 25 / 44

T200I EN IN.2 UG .indd 25 15/05/2019 09:13
M
M M
M
M
M b
M M
M
M
6.4 Restore default settings
You can restore your T2I to its default (original) settings. All the handsets that
are registered to the base will be retained.
Important
Resetting your phone to its default settings will delete all entries in the calls
and redial lists. Entries stored in the phonebook will be retained. The settings
in all handsets and base will be reset as well.
1. Press , scroll d to SETUP and press .
2. Scroll d to DEFAULT and press .
3. Enter the PIN (default setting = 0000) and press . The display shows
CONFIRM ? .
4. Press to confirm or to return to the previous menu. Your T2I will
restart automatically.
6.5 Emergency reset
If you have lost your PIN code, you can still restore your T2I to its default
settings.
1. Remove the battery from the handset.
2. Press and hold
S
while replacing the battery. The display shows
DEFAULT
.
3. Press to confirm. Your T2I will restart automatically.
Note
Entries stored in the phonebook will also be deleted if you emergency reset
your phone.
6.6 Area code setting
1. Press , scroll d to SETUP and press .
2. Scroll d to AREA CODE and press .
3. Enter the desired area code (up to 6 digits) using keypad and press to
confirm.
Note
The area code is the STD code of the city (Area) where the cordless is
connected e.g. for Delhi: 11 please set “11...” in the area code setting for Delhi.
The handset will filter the local area code (set by user) while receiving or
calling back the local number.
Base settings 25