Motorola Symbol TC70 User Manual Download Page 40

Page: 40 / 166

Icon

Description

Indicates that the TC70 is connected to a Bluetooth device.

Connected to a Wi-Fi network.

No Wi-Fi signal.

Notification Icons

Table 7: Notification Icons

Icon

Description

Indicates that more notifications are available for viewing.

Indicates that data is syncing.

Indicates an upcoming event.

Indicates that an open Wi-Fi network is available.

Indicates that a song is playing.

Indicates that a problem with sign-in or sync has occurred.

Indicates that the TC70 is uploading data.

Indicates that the TC70 is downloading data when animated and download is complete when stat-
ic.

Indicates that the TC70 is connected via USB cable.

Indicates that the TC70 is connected to or disconnected from virtual private network (VPN).

Preparing SD card.

Indicates that USB debugging is enabled on the TC70.

Indicates that the MultiUser feature is enabled. Appears only when MultiUser Administrator ap-
plication is installed.

Indicates that a new user is logging in. Appears only when MultiUser Administrator application is
installed.

Indicates the status of the PTT Express Voice Client. See

Notification Icons on page 80

for com-

plete list of PTT Express notification icons.

Table continued…

| Using the TC70

Summary of Contents for Symbol TC70







































































































































































Search results

Summary of Contents for Symbol TC70

Reviews:

Related manuals for Symbol TC70

Brands by name

Popular brands

Motorola Symbol TC70, User Manual

Search results

Summary of Contents for Symbol TC70

Reviews:

Related manuals for Symbol TC70

Brands by name

Popular brands