Motorola SYMBOL LS7708 Product Reference Manual Download Page 22 | Manualshive

Page: 22 / 380

Motorola SYMBOL LS7708 Product Reference Manual Download Page 22

Symbol LS7708 Product Reference Guide

1-4

The Symbol LS7708 scanner supports the following interfaces:

•

TTL-level RS-232 connection to a host. Set up communication between the scanner and the host either by scanning bar code
menus or using the Windows-based programming tool 123Scan.

•

Keyboard Wedge connection to a host. The host interprets scanned data as keystrokes.
International keyboards supported:

• Windows™ environment: North American, German, French, Spanish, Italian, Swedish, UK English, Brazilian/Portuguese,

and Japanese.

• Windows XP/2000™ environment: French Canadian

• Windows 95/98 environment: French Canadian

•

Connection to IBM 468X/469X hosts. Set up communication between the scanner and the IBM terminal either by scanning
bar code menus or using the Windows-based programming tool 123Scan.

•

USB connection to a host. The scanner autodetects a USB host and defaults to the HID keyboard interface type. To select
other USB interface types, scan programming bar code menus or use the Windows-based programming tool 123Scan.

• International Keyboards supported (for Windows™ environment): North America, German, French, French International,

Spanish, Italian, Swedish, British, and Japanese.

•

Synapse capability that allows the scanner to connect to a wide variety of host systems using a Synapse and Synapse
adapter cable. The scanner autodetects Synapse.

Unpacking the Scanner

Remove the scanner from its packing and inspect it for damage. The following items are included in the package:

•

Scanner

•

Mounting bracket and hardware

•

LS7708 Quick Reference Guide

(p/n 72-69530-xx)

•

CD containing 123Scan software and

Symbol LS7708 Product Reference Guide

(p/n 72-69531-xx).

The package may also include the following:

•

Power supply and cable

•

RS-232C host interface cable

•

Synapse Adapter and Synapse cable.

Some host terminals (e.g., IBM 46xx Series) supply power to the scanner, so an external power supply is not required. Contact a
Motorola representative for more information.

If any items are missing or damaged, call the Global Customer Interaction Center. See

for contact information.

KEEP THE

PACKING

. It is the approved shipping container and should be used if it is ever necessary to return the equipment for servicing.

«
...
20
21
22
23
24
...
»

Summary of Contents for SYMBOL LS7708





























































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands