manualshive.com logo in svg

Motorola Symbol LS3408, Product Reference Manual

Share
Download
Motorola Symbol LS3408 Product Reference Manual Download Page 20

1 - 2

Symbol LS3408 Product Reference Guide

This scanner supports:

•

Standard RS-232 connection to a host.

•

Keyboard Wedge connection to a host, where scanned data is interpreted keystrokes. The following 

international keyboards are supported (for Windows

TM

 environment): North America, German, French, 

French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian-Portuguese.

•

Wand Emulation connection to a mobile computer, a controller, or host which collects the data as wand data 
and decodes it.

•

Scanner Emulation connection to a mobile computer or a controller which collects the data and interprets it 
for the host.

•

Connection to IBM

®

 468X/469X hosts. 

•

USB connection to a host. The scanner autodetects a USB host and defaults to the HID keyboard interface 
type. Other USB interface types may be selected by scanning programming bar codes. The following 
international keyboards are supported (for Windows

™

 environment): North America, German, French, 

French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian-Portuguese.

•

Synapse capability which allows a wide variety of host systems to be connected using a Synapse and 
Synapse adapter cable to connect to a host. The scanner autodetects a Synapse.

•

Configuration via 123Scan.

Unpacking the Scanner

Remove the scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact 
Motorola Enterprise Mobility Support at one of the telephone numbers listed on

 page xv

. 

KEEP THE PACKING

. It 

is the approved shipping container and should be used if the equipment ever needs to be returned for servicing.

Summary of Contents for Symbol LS3408



































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands