manualshive.com logo in svg

Motorola Symbol DS6607, Product Reference Manual

Share
Download
Motorola Symbol DS6607 Product Reference Manual Download Page 58

Symbol DS6607 Product Reference Guide

5-6

Imaging Preferences

The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of operation, including 
decode, video, and snapshot.

Operational Modes

The digital scanner has three modes of operation: 

•

Decode Mode

•

Snapshot Mode

•

Video Mode.

Decode Mode

By default, when you pull the trigger the digital scanner attempts to locate and decode enabled bar codes within its field of view. The 
digital scanner remains in this mode as long as the trigger is pulled or until a bar code is decoded. 

Snapshot Mode

Use Snapshot Mode to capture a high-quality image and transmit it to the host. To temporarily enter this mode scan the 

Snapshot 

Mode

 bar code. While in this mode the digital scanner blinks the green LED at 1-second intervals to indicate it is not in standard 

operating (decode) mode. 

In Snapshot Mode, the digital scanner turns on its laser aiming pattern to highlight the area to be captured in the image. The next 
trigger pull instructs the digital scanner to capture a high quality image and transmit it to the host. A short time may pass (less than 
2 seconds) between when the trigger is pulled and the image is captured as the digital scanner adjusts to the lighting conditions. 
Hold the digital scanner steady until the image is captured, denoted by a single beep.

If you do not press the trigger within the Snapshot Mode Timeout period, the digital scanner returns to Decode Mode. Use 

Snapshot 

Mode Timeout on page 5-10

 to adjust this timeout period. The default timeout period is 30 seconds.

To disable the laser aiming pattern during Snapshot Mode, see 

Snapshot Aiming Pattern on page 5-10

.

Video Mode

In this mode the digital scanner behaves as a video camera as long as the trigger is pressed. When the trigger is released, the digital 
scanner returns to Decode Mode. Scan this bar code to temporarily enter Video Capture Mode.

Snapshot Mode

Video Mode

Summary of Contents for Symbol DS6607





























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands