Motorola Symbol DS6607 Page 155 Product Reference Manual Download

Page: 155 / 380

Symbologies

10-13

Decode UPC/EAN/JAN Supplementals

Parameter # 10h

Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are
available.

•

Decode UPC/EAN/JAN Only With Supplementals

is selected, UPC/EAN/JAN symbols without supplementals are not

decoded.

•

Ignore Supplementals

is selected, and the digital scanner is presented with a UPC/EAN/JAN with a

supplemental, the UPC/EAN/JAN is decoded and the supplemental bar code is ignored.

•

Autodiscriminate Option

is also available. If this option is selected, choose an appropriate

UPC/EAN/JAN

Supplemental Redundancy

value from the next page. A value of 5 or more is recommended.

•

Enable 378/379 Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘378’ or ‘379’ prefix by the

supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported instantly upon
decode.

•

Select

Enable 978 Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘978’ prefix by the

supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported instantly upon
decode.

•

Select

Enable Smart Supplemental Mode

to delay only EAN-13/JAN-13 bar codes starting with a ‘378’, ‘379’, or ‘978’

prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported
instantly upon decode.

To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.

Decode UPC/EAN/JAN Only With Supplementals

(01h)

Ignore Supplementals

(00h)

Autodiscriminate UPC/EAN/JAN Supplementals

(02h)

Note

Summary of Contents for Symbol DS6607





























































































































































































































































































































































































Search results

Summary of Contents for Symbol DS6607

Reviews:

Related manuals for Symbol DS6607

Brands by name

Popular brands

Motorola Symbol DS6607, Product Reference Manual

Search results

Summary of Contents for Symbol DS6607

Reviews:

Related manuals for Symbol DS6607

Brands by name

Popular brands