Motorola ST7500 Feature User Manual Download

Page: 82 / 138

Icon

Description

Failed Outgoing Protected Message

Table 25: Outbox Icons

Icon

Description

Delivery in Progress

Delivery Accomplished

Delivery Failed

Protected Message Delivery In Progress

Protected Message Delivery Accomplished

Protected Message Delivery Failed

Encrypted Message Delivery In Progress

Encrypted Message Delivery Accomplished

Encrypted Message Delivery Failed

Encrypted and Protected Message Delivery In
Progress

Encrypted and Protected Message Delivery Ac-
complished

Encrypted and Protected Message Delivery
Failed

4.4.3.1

Opening the Outbox

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

Outbox

The radio displays the status of the outbox for a few seconds (if any):

•

No Messages

•

Outbox Full

– This status is displayed if it is enabled by your service provider.

4.4.4

Call-Out (CO) Box

CO Box

contains incoming and outgoing Call-Out messages.

Clicking

Select

on a Call-Out message headline displays more detailed information on the item.

Clicking

Menu/OK

on a Call-Out message headline displays more detailed information on the item.

MN004519A01-AK
Chapter 4: Main Menu

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands