Motorola ST7500 Feature User Manual Download

Page: 125 / 138

The Phone/PABX Speed Dial feature allows you to dial a shortened number of up to three digits
instead of the full number. The Phone/PABX

Speed #

number is assigned when the dialed number is

added in the contact list.

5.7.3

Receiving Individual Calls

Procedure:

Use one of the following methods to answer a private, phone, or Private Automatic Branch
Exchange (PABX) call.

• Press the

PTT

button.

• Press the

Send

key.

• Press the

Menu/OK

key.

To end the call, press the

End

key.

To end the call, press the

Back

key.

5.8

SIM Card End-to-End Encryption

The following table presents interactions occurring between radios with and without SIM cards. SIM
cards provide End-to-End Encryption.

NOTICE:

SIM card End-to-End Encryption supports the Federal Office for Information Security

of Germany (BSI) feature only.

Table 29: Interactions between Radios with and without SIM Cards

Transmission
Type

Transmitting Ra-
dio

Receiving Radio

Result

Private Call

SIM card

No SIM card

The call is not visible for the
receiving radio. The transmit-
ting radio displays

Called

Party Clear Only

Private Call

No SIM card

SIM card

The

Warning: clear

call

notification appears

and the call is received.

Group Call

SIM card

No SIM card

The call is not visible for the
receiving radio.

Group Call

No SIM card

SIM card

The

Warning: clear

call

notification appears

and the call is received.

Message

SIM card

No SIM card

The

Delivery failed

noti-

fication appears and the mes-
sage is not received.

Message

No SIM card

SIM card

The message is received.

NOTICE:

To send a message or call a non-SIM card radio, turn off the SIM card End-to-End

Encryption.

MN004519A01-AK

Chapter 5: Features

125

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands