The alarm is active for a pre-defined time or until you discard it.
5.3
Call-Out
NOTICE:
This is a Software Selling Feature.
For those who use DMO mode, you are recommended to apply DMO SCK for data
confidentiality.
This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio
interrupts current services and attends to the Call-Out alert without any further delay. After the Call-Out
is cleared by the dispatcher, the radio exits Call-Out mode and reverts to normal mode.
During Call-Out mode, you are only able to receive Emergency calls. However, if your service provider
configures Emergency Calls to be ignored during Call-Out mode, the radio rejects them with no
notification.
If your service provider temporarily blocked the use of PTT in the Call-Out, pressing
PTT
in the Call-
Out mode is considered an invalid key press until the timer expires.
The time-stamp on the Call-Out alert indicates the time and date when the Call-Out is received.
To read an entire Call-Out message, scroll down the screen by pressing the
Down
Navigation key. The
length of the message is indicated by the vertical bar on the left of the screen.
Figure 20: Call-Out Message
Call-Out 121
Severity-1
Test Group
Cat on a tree.
Accept
Reject
NOTICE:
Message protection functionality is enabled in the Inbox and Call Out Inbox. Users
can only delete unprotected messages.
5.3.1
Types of Call-Out Alerts
There are five types of the Call-Out alerts:
Normal Call-Out
An alert message that is sent by a dispatcher either to a single radio or to a group of radios. There
are two types of Normal Call-Out:
With user receipt
The radio gets to the Accepted phase when you:
• select
Accept
,
Reject
, or
Standby
.
• the acknowledgment timer runs out.
Without user receipt
The radio gets to the Accepted phase when you:
• press
Menu
or any key except for the
Emergency
button, or the
Rotary Knob
.
MN004519A01-AK
Chapter 5: Features
118
