Motorola ST7500 Feature User Manual Download

Page: 105 / 138

4.12.2.1

Enabling or Disabling Location

Procedure:

From the home screen, press the

Menu/OK

key.

Select

Setup

→

Location

Select

Off

4.12.3

Language

This sub-menu allows you to change the language of the radio.

4.12.3.1

Setting Language

Prerequisites:

The list of available languages is set by service provider.

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Setup

→

Language

Select desired language.

4.12.4

Tones

This field sets the volume level for the tones set.

This field allows you to activate or deactivate the tones set.

NOTICE:

The radio has two tone packs: Classic Tones (default) and New Tones. Your service

provider decides which tone pack is enabled.

4.12.4.1

All Tones

You can activate/deactivate all tones.

4.12.4.1.1

Setting All Tones

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Setup

→

Tones

→

All Tones

Select

Setup

→

All Tones

Select one of the following options:

•

– Activates all the tones.

•

Off

– Deactivate all the tones.

MN004519A01-AK

Chapter 4: Main Menu

105

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands