Motorola ST7500 Feature User Manual Download

Page: 102 / 138

In the TMO Mode, when Air Encryption is enabled on your radio but cannot be supported due to an

infrastructure failure, the following icon appears on the display: . When encryption is not available in

the DMO Mode, the radio displays: .

4.11.3.1

Viewing Air Encryption State

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Security

→

AirEncrypt

Your radio displays:

•

Air Encryption Is Off

– The Air Encryption is not activated.

•

Air Encryption Is On

– The Air Encryption is activated.

4.11.3.2

Deleting User Keys

IMPORTANT:

The key deletion takes up to 30 seconds. During this period, the battery must not

be removed. Removing the battery during this period may lead to radio malfunction.

Prerequisites:

Ensure that the user key deletion is enabled in the codeplug.

Procedure:

Press

→

Press

→

Power

→

Power

→

Down

→

Down

→

Power

→

Power

→

Encryption and/or Authentication keys are deleted. The radio enters Temporary Disable state and the
service provider must manually restore it.

4.11.4

K Validity

Key (K) is a secret key the infrastructure uses to authenticate the radio in the system. It is part of the
authentication that provides service confidentiality between your radio and the system.

4.11.4.1

Verifying K Validity

Procedure:

From the home screen, press the

Menu

key.

From the home screen, press the

Menu/OK

key.

Select

Security

→

K Validity

Your radio displays:

•

K is Valid

– The infrastructure can authenticate your radio.

MN004519A01-AK
Chapter 4: Main Menu

102

Summary of Contents for ST7500










































































































































Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands

Motorola ST7500, Feature User Manual

Search results

Summary of Contents for ST7500

Reviews:

Related manuals for ST7500

Brands by name

Popular brands