Motorola SRX 2200 MODEL 3.5 User Manual Download Page 156

Page: 156 / 236

The following table shows the differences between
programmable waypoints and preprogrammed waypoints.

Programmable Way-
points

Preprogrammed Way-
points

User-configurable location
coordinates.

Fixed location coordi-
nates:

• Home

• Emergency

• Last Known Location

• Destination

Only the alias is editable,
not the coordinates.

The Home and Destina-
tion coordinates are edita-
ble.

Coordinates can be delet-
ed one at a time, or all at
once.

Coordinates cannot be
deleted.

NOTICE:

The radio automatically exits the feature, if the
feature inactivity timer is enabled. You hear the
Menu Inactive Exit Tone upon feature exit.

Military Grid Reference System (MGRS)
Coordinates

This feature can only be enabled through CPS
configuration. When the MGRS coordinate is enabled, all
location coordinates are displayed in MGRS format,
including the editable locations in GPS.

Accessing the Outdoor Location
Feature

NOTICE:

radio menu may be present on the Location

menu screen if it is preprogrammed by the dealer or
system administrator.

Press the preprogrammed

GPS

button to toggle the

Outdoor Location feature to on or follow the following
procedure to access this feature using the radio menu.

or to

Loc

Press the

Menu Select

button directly below

Loc

The display shows

Location off

English

156

Summary of Contents for SRX 2200 MODEL 3.5












































































































































































































































Search results

Summary of Contents for SRX 2200 MODEL 3.5

Reviews:

Motorola SRX 2200 MODEL 3.5, User Manual, Page: 156 / 236

Search results

Summary of Contents for SRX 2200 MODEL 3.5

Reviews: