Motorola PPC/CPCI-690, Reference Manual, Page: 23 / 176

PPC/CPCI-690 xxiii
Safety Notes
This section provides safety precautions to follow when installing, operat-
ing, and maintaining the PPC/CPCI-690.
We intend to provide all necessary information to install and handle the
board in this Reference Guide. However, as the product is complex and its
usage manifold, we do not guarantee that the given information is com-
plete. If you need additional information, ask your Motorola representa-
tive.
The board has been designed to meet the standard industrial safety
requirements. It must not be used except in its specific area of office tele-
communication industry and industrial control.
Only personnel trained by Motorola or persons qualified in electronics
or electrical engineering are authorized to install, maintain, and operate
the PPC/CPCI-690. The information given in this manual is meant to
complete the knowledge of a specialist and must not be taken as replace-
ment for qualified personnel.
EMC
The board has been tested in a standard Motorola system and found to
comply with the limits for a Class A digital device in this system, pursu-
ant to part 15 of the FCC Rules respectively EN 55022 Class A. These lim-
its are designed to provide reasonable protection against harmful
interference when the system is operated in a commercial, business or
industrial environment.
The board generates and uses radio frequency energy and, if not
installed properly and used in accordance with this Reference Guide,
may cause harmful interference to radio communications. Operating the
system in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense.
If you use the board without a PMC module, cover empty slots with
blind panels to ensure proper EMC shielding. If boards are integrated
into open systems, always cover empty slots.