50 mm
140 mm
140 mm
140 mm
2.6
Preparing Chargers for Desktop Charging
Procedure:
1
Prepare charger for desktop charging by performing one of the following action:
NOTE:
If the charger is placed in a vertical position, it is recommended to place the
charger on the mounting bracket to prevent it from toppling.
Option
Action
Charging with mounting bracket
NOTE:
• It is recommended to use 10–
16x1.5 inch. tapping screw to
mount the bracket onto table
top.
• Ensure the screws do not pen-
etrate through the table.
a
Screw the wall bracket to the table.
b
Place the power supply inside the wall
bracket.
MN007338A01-AE
Chapter 2 : Charger Operations
15
