Commonly Asked Questions
75
An Out-of-RAM status will cause the pager to reset itself.
Deleting my old messages did not help the Low
Memory status. What should I do?
Messages that are deleted from folders are held in the Trashcan
until the Trashcan is emptied. A cleanup schedule is assigned to
empty the Trashcan. When you delete messages from inboxes
and folders to alleviate overuse of memory, you are only shifting
memory use from one file storage area to another. After deleting
messages, you must empty the Trashcan to free the memory for
use (see “To empty the Trashcan” on page 42).
Messaging
Why don’t I receive messages?
Situations that will prevent you from receiving messages
include:
•
Your pager’s radio mode may be set to Off. From the Home
screen, the status line will display “Storing Messages”.
Reset your transmission mode to Send/Receive or Receive
Only. For information on resetting you transmission mode,
see “To set the transmission mode” on page 19.
•
Your pager might be out of range of the nearest transmitter.
Check the icon in the lower right corner of the Home
screen. If you are out of range, your messages will be
transmitted when you are back within transmission range.
Why does the Home screen status line read “Basic
Service” when the radio mode is set to
Send/Receive?
If you have just inserted a new battery or just disconnected the
pager from your PC, it can take a few minutes before you have
“Full Service” access. Your pager reregisters with the service
provider after any suspension in service. Also, if you are on the
perimeter of the transmission range, you might only have
message reception capabilities.
Why does the Home screen status line read “Storing
Messages”?
When your pager loses access to your service provider’s paging
network, your messages are stored by the paging network until
Summary of Contents for PageWriter 2000
Page 1: ...A PageWriterTM 2000 User s Manual ...
Page 4: ......
