Motorola PageWriter 2000, User Manual

Page: 80 / 93

PageWriter
TM
2000 User’s Manual 74
• •
Recharge the battery or insert a fresh battery.
•
If the front LED lights when you replace the battery and the
screen is still blank, your screen’s contrast may be too light.
Adjust the contrast. See “My screen is too dark (or too
light). How do I change it?”.
My screen is too dark (or too light). How do I
change it?
You can quickly change the contrast by pressing , then
holding down until reaching the desired contrast. Your
PageWriter 2000 two-way pager also has a built-in calibration
guide to help you select the best contrast level. For more
information, see “To use the contrast calibration guide” on page
44.
Periodically, the date and time are incorrect. What
causes this?
The clock will maintain its accuracy for about an hour after the
battery has been totally drained of power. To retain date and
time accuracy, replace the battery, as needed. During extended
periods of non-use (i.e., overnight), place your pager in the
plugged-in charger so the battery will be fully charged in the
morning. While using your pager, an extra battery can be kept in
the plugged-in charger until needed.
The charger is intentionally designed so that you cannot
place both the extra battery and the pager in the charger at
the same time.
My pager is acting funny. What’s wrong?
The amount of random access memory (RAM) available on your
pager constrains the number of processes that can run at any
given time. Symptoms of Low RAM status include:
•
menu wheel won’t spin
•
time and date disappear from the screen
•
all inbox and folder message counts display zero
•
Customize list box is empty
•
text box is empty when attempting to forward a message
•
nightly cleanup failed to run
These symptoms allow the pager to conserve RAM use. Reset
your pager to correct the Low RAM status (turn your pager off,
then back on again). To avoid a Low RAM status, turn off your
pager at night when it is not being used.