Motorola OM 2000 Installation & Operation Manual Download

Page: 27 / 81

3 INSTALLATION

This section provides step-by-step instructions to install the OM 2000 in a digital
CATV headend. To complete this process, you must:

•

Mount the OM 2000

•

Connect the interface cables

•

Apply power to the unit

•

Confirm that the front-panel LEDs indicate correct installation

Before You Begin

Before you begin the installation, take a few minutes to review the installation
information, gather special tools, and complete the tasks listed below to make the
installation as quick and easy as possible.

Verify that you received the following items with the OM 2000 shipment:

Item Quantity

Description

OM 2000 chassis

Cabinet to house the RF modulator and related
equipment.

Mounting screws, 10-32, 0.5
inches long, Phillips, round,
with plastic washer

Provided to mount front of unit in the rack.

As applicable:

•

AC cord, 3 conductor,
7 feet 6 inches,
18AWG

•

DC cord, 3 conductor,
15 feet, 14 AWG

Power cord for unit.

The following items that are not included with the OM 2000, but are necessary
to complete the installation:

Item Description

(rear panel connections)

Ethernet cable with RJ-45 connectors

For connection to OAM&P system interface
ENET1.

RF coaxial cable with F-type connectors

Required to connect to the RF Out and IF Out
connectors.

Serial data cables with female DB-9
connectors

Required to connect to DB-9 port.

Summary of Contents for OM 2000


















































































Search results

Summary of Contents for OM 2000

Reviews:

Related manuals for OM 2000

Brands by name

Popular brands

Motorola OM 2000, Installation & Operation Manual

Search results

Summary of Contents for OM 2000

Reviews:

Related manuals for OM 2000

Brands by name

Popular brands