Base settings
25
6.5
Recall mode
Please contact your network provider is you are unsure
which setting to use.
There are 2 recall mode settings:
Timed Br. 1 100 msec
Timed Br. 2 600 msec
1.
Press
m
to open the main menu.
2.
Press
u
or
d
until
Setup
is displayed, then press
m
.
3.
Press
u
or
d
to select
Recall
and press
m
.
4.
Use
u
or
d
to highlight the recall setting you want and
press
m
to confirm your selection.
5.
Press
n
repeatedly to exit and return to standby.
6.6
Restore default settings
You can restore your O1 phone to its default (original)
settings as described on page 26.
1.
Press
m
to open the main menu.
2.
Press
u
or
d
until
Setup
is displayed, then press
m
.
3.
Press
u
or
d
to select
Default
and press
m
.
4.
Enter the 4 digit PIN code and press
m
. (Default
PIN code setting is 0000)
5.
CONFIRM?
is displayed, press
m
to confirm the
reset. The handset will switch off, then switch back on
again with the default settings restored.
NOTE
Please note, restoring the default settings will delete your
phonebook, redial and calls list.
6.7
Restore default settings without a
PIN
If you have forgotten your PIN code, you can restore your O1
to the default settings following the procedure shown below.
1.
Unscrew and remove the belt clip and battery
compartment cover.
2.
Remove the batteries for a few minutes. Press and hold
*
, while still pressing the
*
button, insert the
batteries again observing the polarity markings (+ and -).
3.
Default is displayed, press
m
.
When the phone powers up, the default settings will be
restored.
4.
Replace the battery compartment cover and belt clip.
