Chapter 18
Security
Security menu stores all your security settings.
18.1
Managing PIN Protect
PIN Protect allows you to configure PIN code authentication at the next power on.
NOTE:
To increase security, set your own PIN code. By default the PIN code are all zeros
(depending on the length of the PIN code). For radios with general PIN authentication, the
PIN length is a fixed 4-digit code. For radios with BSI PIN authentication, the PIN length is
configurable by your service provider up to a maximum of 8-digit code. Customers are strongly
advised to change the default PIN code in order to protect devices from unauthorized access.
Protecting the Radio with a PIN Code
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Security
→
PIN Protect
.
3
Select
On
.
4
Enter the PIN code.
Postrequisites:
Each time you turn on the terminal, PIN code is required.
Changing PIN Codes
NOTE:
This feature is only available when enabled by your service provider.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Security
→
Change Code
.
3
Radio prompts for the
Old Code
.
4
If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays
Code Accepted
.
MN006360A01-AE
Chapter 18: Security
104
