manualshive.com logo in svg

Motorola MVME2301, Installation And Use Manual, Page: 149 / 167

Share
Download
Motorola MVME2301 Installation And Use Manual Download Page 149

GL-1

Glossary

Abbreviations, Acronyms, and Terms to Know

This glossary defines some of the abbreviations, acronyms, and key terms 
used in this document.

10Base-5

An Ethernet implementation in which the physical medium 
is a doubly shielded, 50-ohm coaxial cable capable of 
carrying data at 10 Mbps for a length of 500 meters (also 
referred to as thicknet). Also known as thick Ethernet.

10Base-2

An Ethernet implementation in which the physical medium 
is a single-shielded, 50-ohm RG58A/U coaxial cable capable 
of carrying data at 10 Mbps for a length of 185 meters (also 
referred to as AUI or thinnet). Also known as thin Ethernet.

10Base-T

An Ethernet implementation in which the physical medium 
is an unshielded twisted pair (UTP) of wires capable of 
carrying data at 10 Mbps for a maximum distance of 185 
meters. Also known as twisted-pair Ethernet.

100Base-TX

An Ethernet implementation in which the physical medium 
is an unshielded twisted pair (UTP) of wires capable of 
carrying data at 100 Mbps for a maximum distance of 100 
meters. Also known as fast Ethernet.

ACIA

A

synchronous 

C

ommunications 

I

nterface 

A

dapter

AIX

A

dvanced 

I

nteractive e

X

ecutive (IBM version of UNIX)

architecture

The main overall design in which each individual hardware 
component of the computer system is interrelated. The most 
common uses of this term are 8-bit, 16-bit, or 32-bit 
architectural design systems.

ASCII

A

merican 

S

tandard 

C

ode for 

I

nformation 

I

nterchange. This 

is a 7-bit code used to encode alphanumeric information. In 
the IBM-compatible world, this is expanded to 8-bits to 
encode a total of 256 alphanumeric and control characters.

Summary of Contents for MVME2301








































































































































































Reviews:

No comments