Motorola MVME2100, Installation And Use Manual, Page: 31 / 128

Installing the MVME2100 Hardware
http://www.motorola.com/computer/literature 1-11
1
Figure 1-4. Typical Type II PC•MIP Placement on an MVME2100
6. Insert the appropriate number of Phillips head screws (typically 2)
through the holes of the PMC module or PC•MIP card(s), into the
mating standoffs on the MVME2100 and tighten the screws.
Primary PMCspan
To install a PMCspan-001 PCI expansion module on your MVME2100,
refer to the PMCspan PMC Adapter Carrier Board Installation and Use
manual, listed in
Related Documentation on page A-1 , refer to Figure 1-5
on page 1-13 , and perform the following steps:
Warning
Dangerous voltages, capable of causing death, are present in
this equipment. Use extreme caution when handling, testing,
and adjusting.