Motorola MVME167 Series, Installation Manual, Page: 128 / 176

5-22
Using the 167Bug Debugger
5
The 167Bug Debugger Command Set
The 167Bug debugger commands are summarized in Table 5-3 . The
command syntax is shown using the symbols explained earlier in
this chapter. The
CNFG and ENV commands are explained in
Appendix A. Controllers, devices, and their LUNs are listed in
Appendix B or Appendix C. All other command details are
explained in the
MVME167Bug Debugging Package User's Manual .
Table 5-3. Debugger Commands
Command
Mnemonic
Title Command Line Syntax
AB Automatic Bootstrap
Operating System
AB
[
;V
]
NOAB No Autoboot NOAB
AS One Line Assembler AS addr
BC Block of Memory Compare BC range del addr [ ; B | W | L ]
BF Block of Memory Fill BF range del data [ del increment ]
[ ; B | W | L ]
BH Bootstrap Operating
System and Halt BH [ del controller LUN ] [ del device LUN ] [ del
string ]
BI Block of Memory Initialize BI range [ ; B | W | L ]
BM Block of Memory Move BM range del addr [ ; B | W | L ]
BO Bootstrap Operating
System BO [ del controller LUN ] [ del device LUN ] [ del
string ]
BR Breakpoint Insert BR [ addr [: count ]]
NOBR Breakpoint Delete NOBR [ addr ]
BS Block of Memory Search BS range del text [ ; B | W | L ]
or
BS
range del data [ del mask ] [
; B
|
W
|
L
[
,N
]
[ ,V ]]
BV Block of Memory Verify BV range del data [ del increment ] [ ; B | W | L ]
CM Concurrent Mode CM [[ port ] [ del ID-string] [del baud ]
[ del phone-number ]]|[ ; A ]|[ ; H ]
NOCM No Concurrent Mode NOCM
CNFG ConÞgure Board
Information Block CNFG [ ; [ I ][ M ]]
CS Checksum CS range [ ; B | W | L ]