Motorola MVME162P-242, Installation And Use Manual

Page: 109 / 134

A
A-1
A Specifications
Board Specifications
The following table lists the general specifications for the MVME162P2
VME embedded controller. The subsequent sections detail cooling
requirements and EMC regulatory compliance.
A complete functional description of the MVME162P2 boards appears in
Chapter 4. Specifications for the optional IndustryPack modules can be
found in the documentation for those modules.
Table A-1. MVME162P2 Specifications
Characteristics Specifications
Power requirements
(with EPROM; without
IPs) +5Vdc (±5%), 1.75A typical, 2.25A maximum
+12 Vdc (± 5%), 100 mA maximum
–12 Vdc (± 5%), 100 mA maximum
Operating temperature –5° C to 55° C ( 23° F to 131° F) exit air with forced-air cooling
(refer also to Cooling Requirements and Special Considerations for
Elevated-Temperature Operation)
Storage temperature –40° C to +85° C ( –40° F to 185° F)
Relative humidity 5% to 90% (noncondensing)
Vibration (operating) 2 Gs RMS, 20Hz-2000Hz random
Altitude (operating) 5000 meters (16,405 feet)
Physical dimensions
(base board only) Height Double-high VME board, 9.2 in. (233 mm)
Front panel width 0.8 in. (20 mm)
Front panel height 10.3 in. (262 mm)
Depth 6.3 in. (160 mm)