Motorola MVME162, User Manual

Page: 17 / 106

Specifications
MVME162/D2 1-3
1
– VMEbus interrupt handler
– Global CSR for interprocessor communications
– DMA for fast local memory-VMEbus transfers (A16/A24/A32,
D16/D32[D16/D32/D64BLT])
❏
Switches and Light-Emitting Diodes (LEDs)
– Two pushbutton switches (
ABORT
and
RESET
)
– Eight LEDs (
FAIL
,
STAT
,
RUN
,
SCON
,
LAN
,
FUSE
,
SCSI
, and
VME
)
Specifications
Table 1-2, MVME162 Specifications, lists the specifications for an MVME162
without IndustryPacks. The subsequent sections detail cooling requirements
and FCC compliance.
N
ote
Refer to the following sections on Cooling Requirements and
Special Considerations for Elevated Temperature Operation.
Table 1-2. MVME162 Specifications
Characteristics Specifications
Power requirements
(with PROM; without IPs) +5V (± 5%), 3.5 A typical, 4.5 A maximum
+12 Vdc (± 5%), 100 mA maximum
-12 Vdc (± 5%), 100 mA maximum
Operating temperature 0° to 70° C exit air with forced air cooling (see NOTE)
Storage temperature -40° to +85° C
Relative humidity 5% to 90% (noncondensing)
Physical dimensions
PC board with mezzanine
module only
Height
Depth
Thickness
Double-high VMEboard
9.2 inches (233 mm)
6.3 inches (160 mm)
0.66 inch (17 mm)
PC board with connectors
and front panel
Height
Depth
Thickness 10.3 inches (262 mm)
7.4 inches (188 mm)
0.80 inch (20.32 mm)