2
Select
Bluetooth
→
Disconnect All
.
All devices are disconnected.
NOTICE:
To disconnect only one device, from the home screen, select
Menu
→
Bluetooth
→
Devices
, highlight the required device, and press
Disconnect
.
4.6.7
Setting Indoor Location
Indoor Location is used to track radio location while the radio is indoors. When Indoor Location is
activated, your radio receives beacon information from various dedicated beacons within the range of
the radio. The radio then sends the information within a Location Information Protocol message to the
Switching and Management Infrastructure, and a mapping application decodes the information to
calculate the location of the radio.
NOTICE:
Your service provider can enable this feature.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Bluetooth
→
Indoor Location
.
3
Select
Change
.
4
Select
On
or
Off
to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when Indoor Location is activated.
NOTICE:
The use of the Indoor Location feature may have a negligible impact on other
Bluetooth functions on your radio.
4.6.7.1
Viewing Detected Beacons
Prerequisites:
Turn on Indoor Location. If Indoor Location is turned off, the screen displays
Service
Restricted
.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Bluetooth
→
Indoor Location
.
3
Select
Beacons Found
.
4
Select the preferred beacon.
The screen displays details of the beacon.
4.6.8
Connecting Firearms Devices
Prerequisites:
Only pre-approved firearms devices can be used. The service provider is responsible
for configuring the radio to work with specific devices. See
Add Bluetooth Devices on page 143
.
When and where to use:
To select a firearm sensor device for Bluetooth connection.
Procedure:
1
From the home screen, press the
Menu
key.
MN002041A01-AH
Chapter 4: Main Menu
99
