Motorola MTP8000Ex Series, Feature User Manual

Page: 158 / 176

NOTICE: Your service provider sets the priority of the message.
• Push Message
- High — animation and the icon (blinking) are displayed with the New WAP Message tone and
the browser opens.
- Medium — animation and the icon are displayed with the New WAP Message tone.
- Low — icon is displayed with the New WAP Message tone.
- Delete — available only if you are in WAP Box, the text WAP Message deleted remotely is
displayed, otherwise there is no indication.
NOTICE: Animation is not displayed if you are in a call, or in Emergency Mode, or in Call
Out, or in message editor, or PIN lock state, or switching to DMO.
• Load Push Message
- High — browser opens to the user with the New WAP Message tone.
- Low — the icon is displayed with the New WAP Message tone.
NOTICE: The browser does not open if you are in a call, in Emergency Mode, in Call Out, in
message editor, in PIN lock state, or when switching to DMO.
6.14.17.2
Viewing WAP Messages
Procedure:
1 From the home screen, press the
MENU
key.
2 Select Messages → WAP Box .
3 Select the required message.
4 Select Go to to view the message in the browser.
6.15
Call-Out
NOTICE: This is a selling feature.
This feature allows you to receive Call-Out alerts. On receiving the Call-Out messages, the radio
interrupts current services and attends to the Call-Out alert without any further delay. After the Call-Out
is cleared by the dispatcher, the radio exits Call-Out mode and reverts to normal mode.
During Call-Out mode, you are only able to receive Emergency calls. However, if your service provider
configures Emergency Calls to be ignored during Call-Out mode, the radio rejects them with no
notification.
If your service provider temporarily blocked the use of PTT in the Call-Out, pressing PTT in the Call-
Out mode is considered an invalid key press until the timer expires.
The time-stamp on the Call-Out alert indicates the time and date when the Call-Out is received.
To read an entire Call-Out message, scroll down the screen by pressing the down
NAVIGATION
key. The
length of the message is indicated by the vertical bar on the left of the screen.
MN002041A01–AA
Chapter 6: Features
158 Send Feedback