5.10.6.9
Setting Periodic Alert
Procedure:
1
From the home screen, press the
MENU
key.
2
Select
Setup
→
Tones
→
Periodic Alert
.
3
Select one of the following:
•
Alert
— Activates/deactivates periodic tone.
•
Period
— Indicates the time between each periodic tone.
5.10.6.10
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the
permission to talk. Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is
ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
NOTICE:
This feature needs to be enabled by your service provider.
5.10.6.11
Setting D-PTT Tones
Procedure:
1
From the home screen, press the
MENU
key.
2
Select
Setup
→
Tones
→
D-PTT Tones
.
3
Select one of the following:
•
D-PTT Mode
— Activates/deactivates D-PTT tone.
•
Tone Style
— Indicates how many times the D-PTT tone is played.
5.10.7
Display
This menu item allows you to adjust your radio display settings.
5.10.7.1
Setting Font Level
When and where to use:
To increase/decrease text size so you can adjust the interface readability to
existing conditions.
Procedure:
1
From the home screen, press the
MENU
key.
2
Select
Setup
→
Display
→
Font Level
.
MN002041A01–AA
Chapter 5: Main Menu
119
Summary of Contents for MTP8000Ex Series
