manualshive.com logo in svg

Motorola MTP3250, Feature User Manual

Share
Download
Motorola MTP3250 Feature User Manual Download Page 40

2.14

Entering TMO or DMO Mode

Procedure:

1

From the home screen, press 

Options

.

2

Select 

Trunked Mode

/

Direct Mode

.

2.15

Over The Air Programming

NOTICE: 

This is a Software Selling Feature.

Over The Air Programming (OTAP) enables remote radio reconfiguration over TETRA network.

Prerequisites:

Your radio display shows an 

OTAP

 prompt with 

Reboot required. Accept new

configuration?

 text for a new configuration update.

Procedure:

1

Select 

Yes

 to accept or 

No

 to reject the new configuration update.

NOTICE: 

A timer is set when the prompt is displayed. Request is automatically rejected if

there is no user response to the prompt when the timer runs out.

When the OTAP installation prompt is accepted, your radio updates with the new configuration as
received over OTAP. Visible indication guidance and update status is provided during the update.
When the OTAP installation prompt is rejected, your radio returns to idle mode.

2.16

One-Touch Buttons

The One-Touch Button (OTB) feature allows you to activate a feature by a long key press of the
programmable button. Your service provider can also assign one-touch functions to the keypad keys.

NOTICE:

The One-Touch Button and One-Touch Dial are mutually exclusive features.

Table 13: One-Touch Button Features

Feature

Description

Activation of Covert Mode

Turns Covert Mode on or off.

Add Bluetooth Device

Activates scanning for Bluetooth devices.

Any Network

Selects any network.

Any Talkgroup Network

Selects any talkgroup network.

Bluetooth Smart Proximity
Pairing

Activates scanning for Bluetooth Smart Proximity Pairing.

Change Audio Profile

Changes to the specific audio profile.

Change Talkgroup

Changes the talkgroup to the one programmed by your service pro-
vider.

Disconnect All Connected
Bluetooth Devices

Disconnects all Bluetooth devices connected to the radio.

68015000899-FH
Chapter 2:  Getting Started

40  

Summary of Contents for MTP3250






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands