•
Version
– Displays detailed information on software version:
SW
(software version),
HW
(hardware version),
ASIC
(application-specific integrated circuit),
RC
(release code).
4.16.4
Changing GNSS Accuracy
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Location
→
Accuracy
.
3
Select one of the following options:
•
Medium
(default) – Power consumption optimization is combined with less position accuracy.
•
High
– Better position accuracy is combined with less power consumption optimization.
NOTICE:
If connected to an external charging device, the radio automatically enters the
High
mode.
4.16.5
Backlog
This sub-menu allows you to enable/disable, view, and delete backlog reports.
NOTICE:
The location report backlog is only available when Local Information Protocol (LIP) is
enabled.
4.16.5.1
Enabling or Disabling Backlog
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Location
→
Backlog
→
Enablement
.
3
Select one of the following options:
•
On
– Activates location report backlog recording.
•
Off
– Deactivates location report backlog recording.
4.16.5.2
Viewing Backlog Reports
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Location
→
Backlog
→
Reports
.
The radio displays the number of backlog reports stored.
4.16.5.3
Deleting All Backlog Reports
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Location
→
Backlog
→
Delete All
.
68015000899-FH
Chapter 4: Main Menu
121
