4.7.8.4
Setting the Date Manually
When and where to use:
If the date cannot update automatically through the infrastructure.
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Time & Date
→
Set
→
Set Date
.
3
Enter current date using Navigation keys or keypad.
4
Press
Done
.
4.7.8.5
Setting Time Offset
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Time & Date
→
Set
→
Time Offset
.
3
Enter time offset using Navigation keys.
NOTICE:
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
4
Press
Done
.
4.7.8.6
Setting Automatic Updates for the Time and Date
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Time & Date
→
System Update
.
3
Select one of the following options:
•
Off
– All the infrastructure information are ignored. The radio uses internal time and offset.
•
Time Only
– Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
•
Time & Offset
– Time and offset are updated after receiving from the infrastructure.
4.7.9
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all
downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode
is not needed.
4.7.9.1
Enabling or Disabling Energy Economy
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Setup
→
Energy Economy
→
EE Selection
.
68015000797-EH
Chapter 4: Main Menu
97
