• Scroll to the required RMS status.
• Type out a message using RMS Free Text (available in SDS-TL only).
4.3.11
Additional Address
The Additional Address feature allows the radio to send Radio Messaging System (RMS) messages
and Local Information Protocol (LIP) reports to additionally defined recipients.
The default addresses for the RMS messages and LIP reports are defined by your service provider.
RMS messages and LIP reports are also sent to selected and enabled additional address.
You can create, edit, and delete additional addresses using the radio menu. For service provider-
configured additional addresses, your service provider can disable the editing and deletion of the
additional addresses.
You can define up to 30 additional addresses.
4.3.11.1
Enabling or Disabling Additional Address
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Messages
→
Additional Address
→
Enable
.
3
Select one of the following options:
• To activate the feature, select
On
.
• To deactivate the feature, select
Off
.
4.3.11.2
Selecting Additional Address
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Messages
→
Additional Address
→
Select Address
.
The radio displays a list of aliases.
3
Highlight your alias and press
Select
.
4.3.11.3
Viewing Additional Address
Procedure:
1
From the home screen, press the
Menu
key.
2
Select
Messages
→
Additional Address
→
Select Address
.
3
Scroll to select the alias of the Additional Address you wish view.
4
Press the
Menu
key.
5
Select one of the following options:
•
Edit
(for User Defined Additional Address alias)
68015000797-EH
Chapter 4: Main Menu
76
